Starwars Lightsaber | RGB lightsaber 9 Sound Fonts | Metal Hilt Lightsaber Heavy Dueling |

Basic features:

Sensitive Smooth Swing, Blaster, Lock-up, Flash on Clash, Infinite Color Change, Volume Adjustment

LED smoothswing version: 9 sound fonts

After-sales service: We offer a one-year guarantee

If you have any problems, please feel free to contact with us.

Smooth Swing Base Lit Saber USERGUIDE

To wake the lightsaber

Hold down power button for 1 seconds. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode.

Awake mode operation: Pressing the power button will turn the blade on and activate sounds and effects.

When the blade is lit, the power button operates thusly:

– Tap – blaster deflection – Hold 0.5 second,button LED flash 1 time, then release – saber lock-up

Change colors

-Hold 1 seconds, button LED flash 2 times, then release to cycle rainbow blade colors. Once a desired color is reached, tap it to set the color.

-Hold 1.5 seconds, button LED flash 3 times, then release to cycle solid blade colors. Once a desired color is reached, tap it to set the color.

(This function have another version: Hold 1.5 seconds, button LED flash 3 times, then release-saber force.

Two versions shipped randomly, don’t accept designate version)

– Hold press button 2 seconds powers turn off the blade. Button LED flash 4 times

When the blade is off, the power button operates thusly:

Volume adjustment

-Holding the power button down for 0.5 seconds,button LED flash 1 time, while the blade is off, but still in wake mode, let

go of the button will select sound volume.

Change modes

-Holding the power button down for 1 seconds, button LED flash 2 time, while the blade is off, but still in wake

mode, will select a new light effects(stable,unstable,and pulse available).

Change fonts

-Holding the power button down for 1.5 seconds, button LED flash 3 time, while the blade is off, but still in wake mode, will select a new sound fonts.(9sets available).

Turn off

-Holding press button 10 seconds to make the saber sleep. If the saber sits idle for 10 minutes it will also enter deep sleep again.

Sleep mode operation:

When the saber is in deep sleep there will be no lights or sounds to keep power for long time.

Xenopixel USERGUIDE

Activate Muted– double click and hold while OFF

Activate blade – short click while OFF

Play/Stop Music （Some modes None）– double click while OFF

Turn the blade off – hold and wait till blade is off while ON

Next Preset – hold and release while OFF

Previous Preset – hold and wait while OFF

Lockup – hold + hit clash while ON

Stab -thrust forward clash while on

Lightning Block – double click and hold the button while ON

Melt – hold +thust forward clash while ON

Drag – hold + hit clash while ON pointing the blade tip down

Blaster Blocks – short click while ON

Force Effects – hold+twist the hilt while on(While pointing up)

Enter Color Change mode – hold+twist the hilt while ON (pointing down)

Confirm selected color – hold the button until confirmation sound

Enter Volume – press button until button light flash 1 time while blade is off

Trouble Shooting

Issue 1 – Saber has no sound

Saber may be in mute mode. Turn off the saber, then hold the button for 0.5 seconds to change soundvolume.

Issue 2 – Saber loses either red, blue or green color does not light up at all, or has no swing or clash sounds

Charge the battery for one hour, as this is likely a low battery issue. Removing and reinstalling the battery may fix it if the issue is not related to charge.

Issue 3 – When charging, saber cues ‘charging’ then immediately indicated ‘ready’

The battery is not making contact properly with the plates inside. Open the saber and carefully adjust the connectors so that the positive and negative both touch easily.

Issue 4 – If any other problem occurs that the above methods won’t fix

Please contact our customer service team.